Probe Station with a manual/auto switch for multi-point component measurement

• Can measure multi-points of Perovskite Solar Cell.
• Can measure a variety of multi-point components (while measuring 6 or more measurement location).
• Can be upgraded to program control switch, and instrumentation program-controlled multi-point automatic measurement system.
• Laser beam incidents from the back side of the glass
• The holder adapted for glass mounted vertically; Y-Z stage linear fine adjustable for the sample holder movement
• Probe head fine adjustable and quick movement on the linear rails on X to contact the I/O pads on the sample (front side of the glass)
• Suitable for multi-point PEDOT solar glass measurement​

[Prober Specification]

• Laser beam incidents from back side of glass
• Holder adapted for glass mounted vertically; Y-Z stage linear fine adjustable for the sample holder movement
• Probe head fine adjustable and quick movement on the linear rails on X to contact the I/O pads on sample (front side of glass)
• Probe head contains 7 pins in total for electrical contact with 6 solar cells on glass; Contact pins closed to middle of each electrode
• Glass is sized of 25*25mm with thickness ranged of 1.2-1.5mm; In total 6 cells on with each cell area is ca 0.4*0.4mm2
• 1 pc of BNC (female) for signal output; DSUB-9 female for signal input; Rotary switch for cell selection for IPCE measurement
• Cable accessories with immunity treated for the connections
• can be used as multi-point component measurement manual/automatic switch probe station